Belt Load Monitor

Product Details:

Grade Protection IP65
Current Rating 10 Ampere
Surface treatment Polished
Material Cast Iron
Frequency 50 Hz
Input Voltage 230VAC
Output Voltage 24 Volt
Contact 1NO+1NC/2NO+2NC


The extension stand of belt Loading Monitor is mounted in inclined position to the action of the spring. So that Rubber Roller remain upward & the proximity switch remains OFF. When the Belt is started with Load (material), The belt will press the Rubber Roller downward thereby lifting the Mechanical Flag in front of the proximity switch. Than Proximity switch gives the signal that can be used as a sense of Belt Loading condition. This detection of the Roller is between 5mm to 30 mm.

Additional Information:

  • Item Code: BLM-5512


To meet divergent demands of the clients; we bring forth an extensive assortment of Belt Load Monitor.

Also known as  Pull Cord Switch and zero speed switch.

To decrease the pollution created by the dusty condition of the conveyor, Water spraying is done on the conveyor through the nozzles. when these nozzles are activated, Water is sprayed over the conveyor to settle down the dust. these nozzles are activated when the belt is in an overloaded condition. Hence, This belt loading monitor plays an important role in ensuring the belt is running with the load and water is sprayed when the conveyor is running in loaded condition of the Belt.


  • Affordable rates
  • Optimum performance
  • Long operational life
  • Robust design