Description
Technical Specification
Supply Voltage
- System 380 – 440 V AC ± 20%, 45 – 55 Hz.
- Auxillary 90 – 270 V AC / DC, 415 V AC
Output Relay Contact
- Output Relay Contact 2 CO
Trip Setting
| Parameters | Range | Resolution | Fact setting | Trip delay Range | Factory setting | By Pass Facility | Reset type |
| CT Range | 35-175 Amp | 1 Amp | 100 Amp | NA | NA | NA | NA |
| Over Load | Above 115 % of Set Value | NA | NA | IDMT class 2,5,10,15,20, 30 sec | 2 sec | Yes | Auto/ Manual |
| Start up delay | 0 – 60 sec | 1 sec | 10 sec | NA | NA | NA | NA |
| Under Current | 30 – 174Amp | 2 Amp | 50 Amp | 1- 60 sec | 5 sec | Yes | Auto/ Manual |
| Over Current | 110 – 350% | 5% | 200% | 1 -10 sec | 2 sec | Yes | Auto/ Manual |
| Current Unbalance | 20 – 60 % | 5% | 50% | 4 sec Fixed | 4 sec | Yes | Auto/ Manual |
| Current Single Phasing | Yes | NA | NA | 4 sec Fixed | 4 sec | Yes | Auto/ Manual |
| Reverse Phase | Yes | NA | NA | Instant ( < 2 sec) | NA | Yes (Password protected) | Auto/ Manual |
| Rotor Lock | 200- 800% | 50% | 700% | Instant ( < 2 sec) | NA | Yes | Auto/ Manual |
| Earth Fault | 10- 100% | 10% | 30% | 0.5-10 sec | 0.5 sec | Yes | Auto/ Manua |
Fault Memory
- Fault Memory Last 10 faults
Resetting Mode
- Resetting N.A.
Display
- Display 8 X 2 AN LCD
Weight
- Weight 400 gms
Dimensions (mm)
- Overall (L x W x D) 150 x 73 x 113
- Mounting (L x W) 35 mm DIN Rail
Note:
- Wherever not specified Contact Rating : 5A @ 230 V AC (resistive)
