KX-100

Slag quantity is almost the same as a solid wire and multiple pass welding can be performed without removing slag.

KS           D7104 : YFW-C50DM
AWS       A5.18 : E70C-3C
AWS       A5.36 : E70T15-C1A0-CS1-H4
EN          ISO 17632-A : T42 0 M C1 3 H5
EN          ISO 17632-B : T49 2 T15-0 C1A H5
JIS          Z3313 : T49J 0 T15-0 CA-U H5

Description

Sizes (mm) Standard Welding Position Shielding gas Polarity
1.2~1.6 AWS A5.18
AWS A5.36
JIS Z3313
KS D7104
EN ISO 17632-A
EN ISO 17632-B
E70C-3C
E70T15-C1A0-CS1-H4
T49J 0 T15-0 CA-U H5
YFW-C50DM
T42 0 M C1 3 H5
T49 2 T15-0 C1A H5
F, HF CO2 DC(+)
 
Typical chemical composition all-weld metal (%)
C Si Mn P S Cr Ni Mo Remark
0.04 0.54 1.55 0.014 0.011
 
Typical mechanical properties of all-weld metal
Y.S (MPa) T.S (MPa) EI. (%) Hardness (HV) IV (J) PWHT
510 550 29 60 (-20℃)
Product Dimensions and Weld Current Range
 
Welding
Position
Sizes (mm) Ampere (A) Volt (V)
Min. Max. Min. Max.
F, HF 1.2mm 160 300 23 34
F, HF 1.4mm 180 360 24 36
F, HF 1.6mm 200 440 25 40