D3 RET1

Application-

Suitable for Panels in Following Applications:
Measurement Panel.
Test Equipments.

Overview-

Resistance transducer
Input 2 Wire or 3 Wire Resistance output (DC) single or dual
Accuracy 0.5%
Operations
It is a precision grade transducer is used for galvanically isolated measurement of Transformed Tap or Resistance (2 Wire or 3 Wire). It measures the value of resistance on tap position changers, typically used on high voltage transformers. Each position on the selector has an equal value of resistance so that as the tap position is increased or decreased the value of resistance increases or decrease respectively. The input is in the form of Resistance and provides a Stable, Ripple- Free and Optically Isolated DC load independent output in the form of current or voltage. The transducer is fully solid state. Use of latest circuit techniques and quality components ensure reliable operation over long period.

Category:

Description

Technical Specifications

Auxillary Supply

Auxiliary Supply 110/240 V AC (+/-) 20%,50 Hz / 60Hz 24/48/110/220 V DC (+/-)20%                                    60 – 300 V AC / DC

Power Consumption
Power Consumption Less than 4 VA

Input Value
I in As per given range, e.g. 0 – 100 Ohm, 0 – 200 Ohm, 0 – 1KOhm
V in

Resistance Type
Resistance Type 2 Wire, 3 Wire

DC Output (Single / Dual)
DC Output (Single / Dual) 0 – 1 mA DC, 0 – 5 mA DC, 0 – 10 mA DC, 0 – 20 mA DC, 4 –                                                    20 mA DC, (-)20 – 0 – (+)20 mA DC, 4 – 20 mA DC, 500 Ohm                                                    (max), 0 – 5 V DC, 0 – (+)10 V DC, (-)10 – 0 – (+)10 V DC

No of Signal Output
No of Signal Output One No., Two Nos..

Response Time
Response Time Less than 500 mSec.

Input / Output isolation
Input / Output isolation 2 KV 50 Hz for 1 min

Temperature
Temperature 0°C to 55°C

Humidity
Humidity 95% Rh non condensing

Dimensions (L x W x D) (mm)
Dimensions (L x W x D) (mm) 85 x 80 x 120

Weight
Weight 350 gms.  gms.