KX-70CM

Slag quantity is almost the same as a solid wire and multiple pass welding can be performed without removing slag.

KS            D7104 : YFW-A50DM
AWS        A5.18 : E70C-3M
AWS        A5.36 : E70T15-M21A0-CS1-H4
EN           ISO 17632-A : T46 0 M M21 3 H5
EN           ISO 17632-B : T49 2 T15-0 M21 A H5
JIS           Z3313 : T49 2 T15-0 M A H5

Category:
KX-200E
KX-706M

Description

Sizes (mm) Standard Welding Position Shielding gas Polarity
1.2~1.6 AWS A5.18
AWS A5.36
JIS Z3313
KS D7104
EN ISO 17632-A
EN ISO 17632-B		 E70C-3M
E70T15-M21A0-CS1-H4
T49 2 T15-0 M A H5
YFW-A50DM
T46 0 M M21 3 H5
T49 2 T15-0 M21 A H5		 F, HF Ar+20%CO2 DC(+)
 
Typical chemical composition all-weld metal (%)
C Si Mn P S Cr Ni Mo Remark
0.03 0.40 1.60 0.014 0.010 – – – –
 
Typical mechanical properties of all-weld metal
Y.S (MPa) T.S (MPa) EI. (%) Hardness (HV) IV (J) PWHT
480 540 29 – 55 (-20℃) –
Product Dimensions and Weld Current Range
 
Welding
Position		 Sizes (mm) Ampere (A) Volt (V)
Min. Max. Min. Max.
F, HF 1.2mm 160 300 24 32
F, HF 1.4mm 180 360 25 35
F, HF 1.6mm 260 460 27 36

Related products